Drilling machine ( Boring holes in rock, Drilling holes in concrete )

33-1 Ultra Drill
 

uds1

 

uds2

 

Ultra Drills (UDS、UDAS、UDK)

 

Automatic drilling machine to reduce labor costs and increase productivity..

Primarily used for drilling small holes for wedges on concrete surfaces, bedrocks and hard rocks.

Holes are drilled horizontally at a selectable distance.

Tapered rod and bit supplied seperately.

 

Power Source: Air

 

※Ultra Drill PDF

 

 

 

 

 

 

33-2 Ultra Drill with Bracket
 

udswzb1

 

udswzb2

Ultra Drill with Bracket

 

This drilling machine mounted an excavator is to be set on each stone and then drills holes automatically.

This machine can work on concrete, bedrock and hard rocks in construction job site, stone industry etc.

Since operation is to be conducted from the excavator’s cabin and remote controller, drilling work is safe, and workers are free from vibration, dust and noise.

It can work by air compressor and needs tapered rod and bit etc.

 

※Click here to read more.

 

33-3 Multi Drill
 

udrw-md1

udrw-md2

Multi Drill (UDRW-MD)

 

Multi Drill (UDRW-MD) is a multi purpose drilling machine.

It is compact and light weight and able to drill long and short depth easily.

It can be used for drilling on slopes, and with bracket it can be used as Attachable Drill.

If you attach rails, it becomes Ultra Drill and it can be used for bridge pier construction, and drilling in concrete piles.

It also can be used at various other work sites such as slopes, tunnels, roads, caisson, explosion, demolition and quarries.

 

※Click here to read more.

 

33-5 Tilting Ultra Drill
 

udm1

 

udm2

Tilting Ultra Drills (UDM)

 

Semi-Automatic Ultra Drill with middle size drill equipped.

This machine can adjust the angle freely, and is useful especially for narrow places or unstable places in construction job site, stone industry.

It can work automatically. Therefore, it helps saving labor cost, clarifying working progress, preventing health problem etc.

It can work by air compressor and needs tapered rod and bit etc.

 

 

※Click here to read more.

 

 

33-7 Attachable Drill
 

udr1

udr2

 

1. Attachable Drill (UDR)

 

This machine is for drilling hole in stone, bedrock, concrete, etc.

The cylinder which small rock drill attached can be installed on the excavator bucket by bolt and nut.

It can be operated in the excavator cabin, and drilling horizontally is easy.

The Rock Drill installed and length of cylinder can be chose.

The excavator can install this drill is above of 0.05m3 (above 1.6 ton).

It can work by air compressor and needs tapered rod and bit etc.

 

※Click here to read more.

 

 

udr1201

 

udr1202

 

2. Attachable Drill (UDR350)

 

This machine is for drilling hole in stone, bedrock, concrete, etc.

This drill installed bigger rock drill than HIRADO UDR , can attach to excavator by special bracket.

Compared to HIRADO UDR, the depth of hale is deeper, diameter is also wider.

 

※Click here to read more.

 

 

udrw1

udrw2

 

3. Attachable Drill (UDRW)

 

This machine is for drilling hole in stone, bedrock, concrete, etc.

How to use it is basically same as HIRADO UDR. What the differences is up and down of the cylinder, this UDRW’s cylinder in not extended while working. Therefore, it can work even in small area such as tunnel.

It can work by air compressor and needs tapered rod and bit etc.

 

※Click here to read more.

 

 

 

udrwr1

 

udrwr2

4. Attachable Drill (UDRW) with Rotary Bracket

 

This machine is for drilling hole in stone, bedrock, concrete, etc.

Bracket can be applied to any maker’s excavators.

It can drill any directions as the small feeding cell is rotating. 

Suitable for the use at everywhere such as inside tunnels, and building

 

※Click here to read more.

 

 

 

 

33-8 Bridge Pier Ultra Drill
 

udrw-hs1

 

udrw-hs2

 

1. Ultra Drill for Bridge Pier Constructions (UDRW-HS)

 

This machine is for drilling hole in stone, bedrock, concrete, etc.

It suits for the job such as horizontal drilling works at high and narrow spaces such as bridge pier construction sites for train rails, bullet train rails, and highway roads.

Firstly, attach Rail Mount Brackets. (with anchors) Then, attach Rails on the brackets. Finally, set the main body on the rails. It is ready to start Drilling.

It can work by air compressor and needs tapered rod and bit etc.

 

※Click here to read more.

 

 

udrw-vs2

 

udrw-vs1

2. Ultra Drill for Bridge Pier Constructions (UDRW-VS)

 

This machine is for drilling hole in stone, bedrock, concrete, etc.

It suits for the job such as vertical drilling works at high and narrow spaces such as bridge pier construction sites for train rails, bullet train rails, and highway roads.

It can work by air compressor and needs tapered rod and bit etc.

 

※Click here to read more.

 

33-9 Sectional Anchor Drill
 

 

1. Sectional Anchor (Drill UDRR)

 

This is air cylinder which rock drill can install.

To be carried by people, it is made to be light and easy to assemble and disassemble.

The slide guide for the drill is air cylinder type. The drill can be moved up and down by a remote controller. Therefore work condition is good and operation can be done safely.

Because of air cylinders, rod connecting and hole cleaning tasks are easy and quick and also air cylinder feeders absorb vibration from drills and reactive force from bed rocks. Hence the durability of feed cell parts and drills are high.

It can be mainly used in construction job site, anchor job, slopes job, etc.

 

※Click here to read more.

 

 

 

2. Rotary Drill (UDRRH90)

 

This rock drill is for drilling hole in stone, bedrock, concrete, etc.

This pneumatic Rotary Drill is the industry’s first small class drill of power rotation type. Percussion and rotation are driven separately and thus it flexibly suit to any site condition. This durable high performance drill improves your heavy drilling tasks drastically. This is one of the smallest and lightest “39kg” pneumatic Rotary Drill in rock drill industry.

It can be mainly used in construction job site, anchor job, slopes job, clay layer job site, hard rock job site, etc.

Especially, this pneumatic Rotary Drill and Sectional Anchor Drill combination (UDRRH90) are really light. Therefore, it can be curried anywhere such as mountain job site where excavator,  crawler crane can’t go. 

It can work by air compressor and needs tapered rod and bit etc.

 

※Click here to read more.

 

 

 

 

34-7 Upward Drill
 

Upward Drill (UDH)

 

This machine is for drilling hole in stone, bedrock, concrete, etc.

It suits for upward drilling job such as retrofitting works for prevention of earthquake.

No more heavy duty of upward drilling by hand.

It can work by air compressor and needs tapered rod and bit etc.

 

※Click here to read more.

 

34-8 Rotary Drill
 

 

Rotary Drill (HRD-90R)

 

This rock drill is for drilling hole in stone, bedrock, concrete, etc.

This pneumatic Rotary Drill is the industry’s first small class drill of power rotation type. Percussion and rotation are driven separately and thus it flexibly suit to any site condition. This durable high performance drill improves your heavy drilling tasks drastically. This is one of the smallest and lightest “39kg” pneumatic Rotary Drill in rock drill industry.

It can be mainly used in construction job site, anchor job, slopes job, clay layer job site, hard rock job site, etc.

 

 

※Click here to read more.